Choose any part of the minichord to change what it does.
Presets players have shared. Load one to hear it on the minichord, then save it to a bank to keep it. The idea comes from MinichordDrawn's Sound Lab.
take a whole set, or mix your own twelve
the minichord's own program, installed from this page over USB
Updating the firmware from this page needs Chrome or Edge on a computer.
In this browser, update it the old way, with Teensy Loader: the release page has the file and the steps.
It has fewer features, and the advanced settings on this page stop working with it.
If it's plugged in and its light is off, it may be waiting in update mode, after an update that stopped partway or a restart into update mode.
sudo wget -O /etc/udev/rules.d/00-teensy.rules https://www.pjrc.com/teensy/00-teensy.rules
sudo udevadm control --reload-rules && sudo udevadm trigger
sudo wget -O /etc/udev/rules.d/00-teensy.rules https://www.pjrc.com/teensy/00-teensy.rules
sudo udevadm control --reload-rules && sudo udevadm trigger
The minichord's own program: the newest installs from here, over USB.
A locked setting is the minichord's own, whatever preset is loaded: the harp plate, the touch thresholds and the master tuning to begin with. The padlock beside a setting locks or unlocks it. Firmware 76 or later.
Back to factory settings. This erases what the bank holds and can't be undone.
the 21 square buttons
the touch plate
the button at the top right
Press: chords hold until the next. Hold down: rhythm mode on or off. In rhythm mode a press taps the tempo.
for the chords and the harp
a tanpura on the key's root
the reverb room and pan, shared by the chords and the harp, and the bends on everything
the chords or the harp, shaped by sound over USB
sound from a phone or computer, over USB
the round light under the buttons
how the minichord talks to a computer
minicontrol by The Key & Cable Company · Say thanks